Knickernappies Diaper Sprayer
Product Description
The Knickernappies Diaper Sprayer is perfect for rinsing out soiled diapers quickly and conveniently; no dunking! It is especially helpful for babies eating solid foods. Complete pre-assembled kit fits in minutes with the smallest spray profile and multiple flow settings for minimum over-spray. Reinforced fittings for years of leak-free trouble free use. Great also for washing out toddler potties and potty training rings.
The Knickernappies Diaper Sprayer is a complete kit fully assembled for your convenience. The complete package includes trigger operated sprayer, flow control valve, compression connectors, wall bracket (which hooks to side of toilet easily), screws, and anchors.
All metal parts (not plastic like some other sprayers) and made in the USA!
Installation instructions: Photo illustrations and complete instructions are included in every package. An adjustable wrench or pliers is the only tool necessary for installation. Installation takes 5-10 minutes.
* Step 1 Turn off water supply by turning the flush tank shut-off valve. Flush to make sure flush tank is empty and water has stopped filling. * Step 2 Remove the pipe connecting the shut off to the tank valve * Step 3 Screw the tank nut to the nut underneath the Toilet Flush Tank. The ¾” brass nut can be screwed to the shut-off valve. * Step 4 Install the Wall Bracket by either using the anchors provided in the kit or using the double sided tape. * Step 5 Switch on the Shut-off valve. Make sure that there is no water dripping from the Tank valve or Shut-off valve. In case of water dripping close the shut-off valve and tighten the nuts again.
The Knickernappies Diaper Sprayer is a complete kit fully assembled for your convenience. The complete package includes trigger operated sprayer, flow control valve, compression connectors, wall bracket (which hooks to side of toilet easily), screws, and anchors.
All metal parts (not plastic like some other sprayers) and made in the USA!
Installation instructions: Photo illustrations and complete instructions are included in every package. An adjustable wrench or pliers is the only tool necessary for installation. Installation takes 5-10 minutes.
* Step 1 Turn off water supply by turning the flush tank shut-off valve. Flush to make sure flush tank is empty and water has stopped filling. * Step 2 Remove the pipe connecting the shut off to the tank valve * Step 3 Screw the tank nut to the nut underneath the Toilet Flush Tank. The ¾” brass nut can be screwed to the shut-off valve. * Step 4 Install the Wall Bracket by either using the anchors provided in the kit or using the double sided tape. * Step 5 Switch on the Shut-off valve. Make sure that there is no water dripping from the Tank valve or Shut-off valve. In case of water dripping close the shut-off valve and tighten the nuts again.
